This Customer Project article takes a look at a robotic platform designed to carry people.
Jenny 5 – A Humanoid Robot
This Customer Project article takes a look at a humanoid robot inspired by Johnny 5 from the movie Short Circuit.
Nomad Robot Build
This Customer Project article takes a look at an offroad radio controlled robot built from a Nomad chassis kit.
ROVR Robotic Camera Platform
In this Customer Project article we take a look at a robotic camera platform designed for recording 360 degree video.
Doctor Who K9 Build
Customer project: Richard Hopkins built a working K9 robot dog from Doctor Who, driven by two 24V scooter motors on a RoboClaw 2x15A motor controller with a Raspberry Pi brain, LIDAR, infrared, and ultrasonic sensors, and free build plans.
Team Gabriel Takes Home Gold in Nepal
In this Customer Project article we take a look at a combat robotics team sponsored by BasicMicro and their recent win in Nepal.
RC Controlled Robot
This Customer Project article takes a look at how simple it is to set up RC control of just about any robotics project you might have in mind.
Combat Robot RC Setup
Set up a RoboClaw motor controller for combat robot RC control: choose single stick (arcade) or dual stick (tank) driving, wire the receiver, configure RC mode in Motion Studio, and test the battle bot.
Aion Robotics R1 Autonomous Robot
Customer project: Aion Robotics built the R1, an autonomous rover for education and research, around a RoboClaw motor controller, four 40:1 gear motors, and a choice of Pixhawk or NVIDIA Jetson with ROS.