A voltage clamp protects a RoboClaw motor controller and its power supply from regenerative voltage spikes. This tutorial shows how to wire and configure a voltage clamp using either the BasicMicro VClamp board or a discrete MOSFET circuit.
Model 7: An Autonomous Robot
In this Customer Project article we take a look at a robot packed full of sensors for autonomous navigation.
A Humanoid Robot Named MILO
In this Customer Project article we take a look at a large humanoid robot named MILO.
Teensy Simple Serial Control of RoboClaw
In this Application Notes a Teensy microcontroller is used to control a RoboClaw motor controller in simple serial mode.
Using Linear Actuators with RoboClaw
Linear actuators are a common part in many robotics projects. This Application Note looks at how to wire them to a RoboClaw motor controller and tune them for position control.
Robotic Drill Table
This Customer Project article takes a look at a custom piece of shop machinery built using a RoboClaw motor controller.
Musi Combat Robot
In this Customer Project article we take a look at a heavyweight combat robot name Musi.
Understanding Acceleration and Deceleration Values
The values used for acceleration and deceleration in Motion Studio and the available software libraries can be understood in several terms. The App Note looks at how to make sense of the various ways they can be interpreted.
Ikedo Kogeki Team Takes Gold in Turkey
The Ikedo Kogeki robotics team from Malaysia recent competed in Turkey and took gold in the robo sumo competition using a RoboClaw motor controller.
RoboClaw 15, 30 and 45 Amp Case
This Application Note looks at the features and benefits of the case and fan combination for select RoboClaw motor controllers.